Welding brush manufacturing and design from GordonBrush

Welding Brush Manufacturing

Welding brush manufacturing is a forte of Gordon Brush. A welding brush, or hand held brush is a smaller brush, usually made with staple set or hand laced construction, that is used for those hard-to-get-to areas. People often refer to Hand Held brushes as toothbrush style brushes, welders, platers or scratch brushes, artist or paint brushes. All Hand Held brushes can be used for cleaning, scraping, deburring, finishing, removing static electricity, washing, spreading, dusting, solution retention applications, detailing, prep work, sliding, applying, varnishing, spot cleaning and painting, as well as other applications. Please give us a call if you have a need for a brush type that is not listed or shown here. We will work with you to make the brush you need.

welding brush

Welding brushes are brushes typically small in nature that one can hold in their hand to perform work. The brushes are usually made by stapling bristle into the handle (like a block brush), hand tying the filament, gluing the bristles into the brush head (an Applicator brush), or stamping closed the edge of the brush head where the bristles are inserted (an Acid, Artist, or Pencil brush). Hand held brushes can be also made by inserting bristles into wire that is twisted.

The size of a welding brush reflects the measurement of the handle's length, width and height or diameter. The handle can be a small as 1/4" (6.4mm) in length, as small as 1/4" (6.4mm) in width, and the height must be at least 1/4" (6.4mm) for conventional stapling. For Anchor Set brushes (like your ordinary toothbrush), the height may be as small as 1/8" (3.2mm) and as long as you want. For round handles, the smallest handle diameter is 1/8" (3.2mm). The style of the handle can be square, rectangle, triangular, round, or any combination thereof. The trim length on any of these brushes can range from as short as 1/16" (1.6mm) to as long as 6" (152mm). These measurements hold true for any bristle material.

For a specific brush you may need, further scan this Web site, or call us at 1-800-950-7950 or 1-323-724-7777. We are more than willing to help you find the brush you need. If you know you need a custom brush, complete the Hand Held Brush Design Sheet that follows and fax it back to us. Gordon Brush will get back to you within 24 hours with a quotation.